T2408
Product Overview
No. 2408 tractor drives are powered by NEMA D flanged mounted motors driving through fully enclosed double reduction gearing to 10 in. diameter polyurethane drive wheels. Gearing operates in an oil bath. Traction is obtained by the drive wheel bearing against the bottom of the track. Pressure is applied by two compression springs and is adjustable. Parallel links connect the drive assembly to the 4-wheel carrier assembly and transmit the motor torque directly to the 4-wheel assembly instead of adding to or subtracting from the drive wheel pressure. This results in the drive producing the same draw bar pull for both directions of travel. These drives are available with 112 through 5 horsepower motors. Nominal speeds are 100, 150,200, 250 and 300 FPM; other speeds can be furnished.
They are available with squirrel cage motors and single speed solid state or variable frequency control, multi-speed squirrel cage motors and 2-speed solid state control, and wound rotor motors and variable speed controL Other motor and control systems are available for special applications.
No. 2408J drives are used on all applications except where conductors are at 6-1/8 in. elevation. No. 2408K drives are used where conductors are at 6-1/8 in. elevation.
