T24010
Product Overview
No. 24010 tractor drives are powered by NEMA C face mounted motors driving through single reduction worm gear reducers to 6 in. diameter polyurethane drive wheels mounted on the output shaft of the reducers. Traction is obtained by the drive wheel bearing against the bottom of the track. Pressure is applied by compression spring and is adjustable. These drives are available with 1/2, 3/4 and 1 horsepower motors. Nominal speeds are 55 and 90 PPM; slower speeds can be furnished. Drives with 1 HP motors are available for 90 FPM only. They are available with squirrel cage motors and single speed solid state or variable frequency control and multi-speed squirrel cage motors and 2-speed solid state control.
The drawing provides maximum clearance dimensions. The dotted lines indicate the single speed control panel location for single girder carriers. Consult factory for dimensions of variable frequency and 2-speed control panels.
IMPORTANT: 24010 drives cannot be used on monorails with switches due to interference between the worm gear reducer and switch frame.
